BLANC Laser transfer paper for Dark fabric A4

How to use BLANC Laser transfer paper for Dark fabric A4

1. Print the design onto the rough side of the blanc paper
2. Wait 10 to 15 minutes for the paper to cool completely
3. The cover sheet is separated from the printed part, and if the edges are desired to be cut, they are cut first, and then the cover is separated.
4. Place the printed blank paper face up over the T-shirt on the press and place a silicone sheet on top of the blank paper.
5. Set heat press temperature 150°C and time 20 seconds.
6. Wait until the silicone sheet cools down, remove it and the T-shirt is ready.

Important purchase supplies for printing

• silicone sheet
• Electronic scissors – as desired
• Protective Film Paper Pro 90 – as desired

Important tips when using paper for dark fabrics

• print on the rough side of the paper
• Normal printing – not reversed
• Compatible with all laser printers
• Compression is medium to strong
• The pressure is strong when using Pro 90 . protection films
• Printer settings: Choose printing extra heavy paper 250 gr
• Temperature 150°C – Time: 110sec If using a mini press, the temperature is: 140°C
• washing temperature is 40C, and with the use of Pro protection films, it is possible to wash up to 100 degrees