Accuracy +/- 0.02 mm
Density 1.24 g/cm3
Tensile strength 65 Mpa
tolerance 0.02 mm
Environmental – friendly and non-toxic .
Good tensile strength, good ductility.
PLA is one of the least demanding filaments to print.
PLA created from processing any number of plant products and safe for use.
Low material shrinkage rate, uniform diameter. Non harmful, good material toughness.
Used primarily in food packaging and containers.
Used in education, art, industry, architecture, medical etc…
Transparent and can be Colored to various degrees of translucency and opacity.
Strong, and more rigid than abs.
Available in different Colors and translucency and glossy texture.
Higher maximum printing speeds, lower layer heights, and sharper printed corners.
Made in China
Good molding effect, smooth and delicate. Row neatly without tangle.
PLA Filament is one of the most widely used materials for 3D printing.
Easy to use as it warps very little as it cools. Moreover, PLA emits very minimal odor.
Before printing, you should check that the machine is in its normal status and make sure that the distance between the hot bed and the nozzle is correct, and it is highly recommended to clean up the residue on the nozzle.
Make sure that the consumables are knotted, and always make sure to fix the thread head every time they are used up.
Note that the printing temperature varies with the equipment, and the best feeding temperature can be obtained before extrusion.
Printing temperature should not be too high, otherwise there will be possibility of wire drawing and folding.
Add additional fans to accelerate cooling to avoid bad molding.
The retraction process entirely depends on the style of extrude the 3D printer has.
Keeping the PLA Filament dry will ensure its non-physical damage.