Transfer Tape for surface vinyl 100X30 cm

How to use the adhesive transfer tape

1. Cut out the vinyl design using a cutter plotter
2. Cut a piece of the transfer tape slightly larger than the vinyl design and peel the backing paper off the transfer tape.
3. Carefully place the transfer tape sticky side onto the vinyl design, and smooth it down with a squeegee tool
4. Trim the excess transfer tape around the vinyl design
5. Clean and dry the surface where you will apply the vinyl design, making sure it is free from dust and debris.
6. Carefully place the vinyl design onto the surface, making sure it is level and centered as desired
7. Use a squeegee tool to press the vinyl design onto the surface
8. Slowly peel away the transfer tape at a 45-degree angle, being careful not to lift the vinyl design off the surface

Specifications of the transfer tape

• Size: 100X30 cm
• Used with surface vinyl
• Clear, transparent color with black lines to make it easier to align your design
• medium-tack adhesive that is strong enough to hold vinyl designs in place but soft on the surface it is applied to.
• Reusable