USA Surface Vinyl for perfumes various colors

Requirements

• lamination film
• cutter plotter
• heat blower
• transfer tape
• sublimation printer
• laser printer
• laminator
• transfer paper

How to cut and use USA Surface Vinyl

• Place the vinyl in a plotter machine (such as cricut or cameo) and set the settings to 40 force and 12 or 13 speed.
• Once your design is cut, apply transfer tape to transfer it from the vinyl to your desired product.
• Use a heat blower or heat press for a few seconds to secure the vinyl to the product.
• For printing on a mug, use a heat blower to heat the mug over medium-high heat for 3-5 minutes after transferring your design.

How to print USA surface vinyl with a laser printer

1. Choose the label printing settings on the printer
2. Print the logo on the sticker
3. Add adhesive protection film to the printed vinyl
4. Insert the sticker into a cutter plotter to cut the borders of the logo (do not remove the sticker yet)
5. Put a silicone sheet on top of the sticker or foil, and then insert it into the thermal laminator, at a temperature of 175-180
6. The sticker is ready. Start to gently remove the logo from the sticker for use.

How to print USA Surface Vinyl with a Sublimation Printer:

• Print your photo on thermal sublimation paper using a Sawgrass or Epson sublimation printer.
• Place plain white paper over the heat press to protect it.
• Place the printed sublimation paper on the vinyl and a silicone sheet on top inside the heat press.
• Set the temperature to 200 degrees and the time to 60-80 seconds. Heat press pressure should be medium.
• Remove the sublimation paper so that the image is printed on the vinyl.
• Paste the printed vinyl onto the object and insert it into the press again for 5 to 10 seconds to permanently fix it.

**Additional Tips:

• Use lamination paper and a laminator set to 160-170 degrees for matte vinyl.
• Gold, silver, opal, and hologram glitter vinyl do not require lamination paper.
• Place a heavy object on plastic or acrylic surfaces like cards to return them to their original form after using a heat press to fix vinyl.
• Peel off the sticker tip and attach it to the cup before slowly rotating the cup while spreading the sticker for perfect application.
• Invert the design before cutting thermal vinyl.

Specification of USA Surface Vinyl for perfumes various colors